新闻资讯

新闻资讯

current position: Home > News Center > Industry news

hot key wordsKeywords

contact usContact Us

Wuxi Ouliwei Machinery Manufacturing Co., Ltd

Add:12, Tianshun Road, 

Yangshan Town, Huishan

District, Wuxi City

Postal Code: 214156

Tel: 0510-83959900

Fax: 0510-83952786

Contact: Yang Jianping : 13951509790

Yang Jun : 13921390298

Email:young880@163.com

What is the difference between veneer hot press and commonly used hot press?

2024-03-25 18:45:59
times

Wuxi Ouliwei Machinery Manufacturing Co., Ltd. has a detailed discussion with you Veneer hot press machine What is the difference between it and a commonly used hot press?

贴面热压机图片


Veneer hot press machine What is the difference between it and a commonly used hot press?


There are still some differences between veneer hot press machines and commonly used hot press machines. Veneer hot press machines are mainly single-layer, while general hot bed machines are generally multi-layer, and they differ in structure and pressure. The maintenance of the veneer hot press machine is very important and related to the service life of the equipment, so we need to take it seriously. It should be carried out under the condition of power outage, and warning signs should be hung in the county, as well as some important safety protection measures should be selected to ensure safety.


The cleaning of veneer hot press machine should not use flammable solvents because it is more risky. According to the requirements and content of the regulations, graded maintenance is generally recommended. The veneer hot press machine is mainly used in the furniture industry, but it is also used in the production of doors and windows. Its primary advantages are simple structure, convenient operation and repair, high investment efficiency, and can also achieve continuous automation production.


There are generally two types of veneer hot press machines: those used for slicing veneers and those used for cleaning paper with short damage periods. These two types should be determined based on the main direction of the enterprise's products to determine the primary parameters of the press machine. The production line for producing veneers should have a shorter press length and faster production speed; The production of medium thick plates mainly requires a longer press length and a relatively lower production speed. According to the requirements of the hot pressing curve, the structure and oil cylinder are divided into several sections, each section has a set of heat transfer oil secondary circulation system, and each system is designed according to the heating requirements. It is necessary to fully consider the requirements of different board types and specifications to limit the program, and leave a certain amount of heating margin for the limitations and forward production of special boards


Is there an important factor to consider when purchasing a veneer hot press machine? Are the relevant elements comparable?


When selecting products for veneer hot press machines, it is necessary to comprehensively consider all relevant factors in order to make accurate judgments and correct selections. Similarly, there are still some important considerations, but it is important to know that anything related to purchasing a product is an important consideration, not just some of them.


From a professional perspective, the relevant elements of hot pressing selection are incomparable, so the answer to the second question is no. On the other hand, this comparison is meaningless.



贴面热压机图片1


If you want to learn more about related knowledge, you can browse our company's website and we will provide you with more professional information!


Recently Viewed:

Related products

Related news

  • menu
Follow us
Bottom QR code