Veneer hot press is a kind of equipment for hot pressing and bonding, which is widely used in furniture manufacturing, architectural decoration, wooden door manufacturing and other industries. When using a veneer hot press, you need to pay attention to the following safety matters to ensure the safety of the operator and the equipment.

1. Operator safety:

a. The operator should wear appropriate labor protective equipment, such as heat-resistant gloves, anti-glare glasses and safety shoes, to protect their safety.

b. The operator should receive relevant training, be familiar with the operation methods and safety procedures of the equipment, and understand the composition, working principle and precautions of the veneer hot press.

c. The operator should be vigilant and attentive during operation to avoid accidental injury due to negligence or inattention.

2. Electrical safety:

a. The power cord of the hot press should be connected with the ground wire, and ensure that the grounding of the power supply is good to prevent electrical failure and electric shock.

b. Before performing any repair and maintenance operations, cut off the power and air supply and confirm that the relevant circuits and equipment have completely stopped operating.

3. Equipment safety:

a. Before using the veneer hot press, carefully check whether the various parts of the equipment are intact, such as the heating plate, pressure plate, guide device and control panel, etc., to ensure that the equipment can work normally, and replace the worn or damaged parts in time.

b. Before using the hot press, the up and down stroke and stop position of the machine should be adjusted to ensure smooth operation and avoid hand clamping or other accidental injuries.

c. When the operator approaches the working area of the machine, the operation of the machine should be stopped to avoid accidental injury.

d. Veneer hot press should be placed on a stable ground, and use bolts to fix the equipment to ensure the stability of the equipment.

4. Pressure safety:

a. Before the operation of the veneer hot press, the appropriate pressure size and holding time should be set according to the work needs, and the bearing capacity of the equipment should not be exceeded during use to avoid excessive force on the equipment and the operator.

b. When hot pressing the larger size of the workpiece, it should be ensured that the workpiece is under uniform pressure to avoid equipment failure or accidents caused by workpiece deformation or uneven pressure.

5. Temperature safety:

a. When the veneer hot press reaches the working temperature, attention should be paid to avoid contact with the heating plate and pressure plate to prevent burns. The operator should use a tool or scratch paper to operate, not directly by hand.

6. Fire prevention and environmental safety:

a. Veneer hot press is hot pressing the workpiece through the heating plate, so in the process of use, attention should be paid to avoid coating, glue and other flammable substances and flammable gases into the machine, in order to prevent fire accidents.

b. When using coating and adhesive, materials that meet environmental protection standards should be selected to avoid harmful gases and solvent volatilization.

In summary, the use of hot press need to pay attention to the safety of operators, electrical safety, equipment safety, pressure safety, temperature safety and fire protection safety and other aspects of the problem. Only by complying with the relevant safety procedures and operating guidelines in all aspects, and fully recognizing the potential dangers of the veneer hot press, can the safety of the workplace be ensured and accidents be prevented.