A brief analysis of the principle of veneer hot press

Hot press is the use of heating and pressure of the safe way of clothing, mainly suitable for the hot melt of zipper double-sided tape and bag cover and pocket clothing industry, but also because of hot stamping and hot stamping and other industries. The main technical solution is that the lever installed in the body of the hot press can be wrapped around the lever shaft in the body of the equipment to swing back and forth, the other end of the lever is installed a set of hot press parts, the lever and the manual are connected together, the switch is installed on the same side of the manual device, and the pneumatic equipment connected with the switch is fixed to the body of the hot press.

The operation mode of the hot press is very simple, the operator can control the cylinder through the manual device of the equipment, and the pneumatic device can be opened when the hot press plate and the workbench reach a certain distance, which greatly improves the problems such as hot press.

The equipment structure composed of thermal reflective materials, working beams, thermal insulation materials, thermal plates, cooling devices and circulating pumps and some series of processes used under heating conditions, such as thermal insulation, thermal reflection and cooling water circulation, greatly improve the technical achievements of hot pressing equipment, on the one hand, save a lot of heat energy, On the one hand, it also ensures that the hot press plate is not easy to lose in the process of working, so that the temperature of the upper and lower panels of the equipment can be consistent, which greatly improves the operating accuracy of the hot press plate. The main structure of the automatic hot press is the track, the upper and lower die and the related transmission device.