Which cushion is more suitable for veneer hot press

Veneer hot press there is a silicone cushion is our current market demand is relatively large, is some manufacturers according to the characteristics of the veneer hot press and specially designed and produced one, this cushion replaces the previous traditional felt pad, more suitable for use in the hot press in the pressing reinforced wood doors, plywood, flooring, particleboard, veneer panels and other different furniture occasions are very suitable.

Friends who use hot presses should know the use of cushion pads. In the working equipment combination of hot presses, cushion pads are installed in the middle of the template and hot platen, so that the working temperature and pressure of the hot platen can be evenly transmitted to each place, so that the tightness of the substrate and the veneer can be more appropriate and symmetrical, and the adhesive can be relatively flat to a piece. In this way, the internal quality of the product and the smoothness of the surface can be greatly improved, and the bad situation of the pressure plate can be effectively improved, and the template can be protected from harm to a certain extent.

Generally, the main structure of the silicone cushion produced on the market is the combination of silicone and skeleton, the thickness is about 2.5mm, the heat resistance can be as high as 250 ° C, there is a strong tear resistance, it is not easy to deform, the thickness is much more uniform than the traditional cushion, and the service life can be longer than the ordinary cushion.